Probst Handling

Universally suitable for precise and flexible screeding of laying courses on both, large and small sites. Comfortable upright working position.

• Consists of the following components:
  Telescopic aluminium screeding profiles, height adjustable roller units on either side, pulling elements.
• The aluminium profile has been optimized so the device neither move upwards when pulled by hand nor when pulled with chains mechanically. In one run a clean and exact screed can be produced.
• The profile was increased in order to be able to move more material when the predistribution of the screeding material is very rough.
• Step above the roller unit on which the operator can stand to increase the pressure to the ground when using the TAS-M mechanically.
• Working width up to 6,000mm (20feet) by duplicating the profile (available on request).
• Special aluminium profiles, consisting of a low wear, high-tensile alloy are designed to be fully telescopic to one another, stepless. With integrated jam system to lock the telescopic parts in any desired position.
• All metal parts are galvanized.
• Equipped with height adjustable roller units at each side, including screeding rail cleaning wiper as well as material turn-away metal sheet. Height adjustable directly above scale.
• For mechanical operation 2 pulling chains are included in the standard equipment.

Particularly handy:

For hand operation the TAS can be easily pulled by means of standard shovels while standing in a comfortable upright position!