Screeding

Telescopic Screeding Bucket TAK

Order-Number: 51000013, 51000018

Universally suitable for precise preparation of the laying course. Specially designed for mechanical operation.

Consisting of the following components:

  • Telescopic aluminium screeding profiles
  • Height adjustable roller units on either side
  • Special aluminium profiles - enormously stiff with low-wear and high-tensile alloy are designed to be fully telescopic and continuously variable. With integrated jam system to lock and release the telescopic segments in any desired position
  • Each side equipped with height-adjustable and smooth-running roller units with sliding metal sheets and deflectors
  • No height mismatch at the single telescopic junctions as all profiles are arranged at the same level.
  • The skillfull design of the profile and its height of 300 mm allows the distribution of lots of material. By universally suitable handling attachment, the TAK can be lifted and transported.
  • The bucket filled with screeding material can be picked-up with a wheel loader for accurate discharge.
  • With the recommended professional model TAK 750, each working width between 1,200 mm (4 feet) up to 7,500 mm (24.6 feet) can be covered.

TAK 750:

  • recommended professional model, consisting of: 1 each Aluprofile 1,100,  1,700,  2,700,  3,000 mm long with integrated jam System.
    1 set=2 Units height adjustable roller Units with wipers, with handling System for operating with loader.
    1 set= 2units pulling chains, incl. hooks each working width between 1,200mm and 7,500mm can be achieved.
  • Dead Weight kg (lbs): 190 (420)

TAK 350:

  • Basic model, as described above, only with 2 Alu-Segments each 1,700mm Long, achieving each working width between 1,750mm and 3,500mm
  • Dead Weight kg (lbs): 95 (210)

TAK-DP

  • Special complete device for screeding of roof or pan profiles.
  • Working width adjustable stepless from 2,500 mm (8 feet) until 7,500 mm (24.6 feet) length.